Minotune

The guide

How to use Minotune

Every feature in plain words. The same guide is inside the app, behind the question mark in the library.

Start here

How Minotune is laid out

Projects hold songs, songs hold versions.

Minotune is a place for music that is not finished or not released yet: you keep it, listen to it anywhere, and get feedback on it without it leaking.

  • A project is a record, an EP, or any set of songs that belong together.
  • A song is one track of it.
  • A version is one bounce of that song. Every new mix or master is added as the next version of the same song, so nothing is lost and any two can be compared.

In the library, top right: the status light, the question mark for this guide, the bell for notifications, and your picture, which opens Settings.

The library shows your projects. Tap one for its songs; tap a song for its page with the waveform, the versions and the comments. Music keeps playing while you move around: the bar at the bottom is the player.

The walkthrough

If you want it, the app shows you its main controls.

Where: Asked once when you first sign in on a device. Settings → Guide and walkthrough → Walkthrough.

The first time you sign in on a device (the phone app, the desktop app, a browser), you are asked whether you want to be shown around. Say no and nothing gets in your way.

Say yes, and the first time you open the library, a project and a song, the screen dims and the main controls light up one after the other, each with a short explanation, including where this guide is.

  1. Read the card next to the lit control.
  2. Press Next (or anywhere on the screen) for the next one, Back for the one before.
  3. Press Skip to stop. That screen will not show it again.

You are only shown controls you can actually use: someone listening through a link sees fewer steps than the owner.

  • To switch it on or off later: the switch in Settings → Guide and walkthrough → Walkthrough.
  • To see it again: Settings → Guide and walkthrough → Walkthrough → Show it all again.

It is remembered per device: on a new phone or browser you are asked once more, because each looks a little different.

Adding music

Make a project, add songs, add new versions.

Where: Library → New project. Project page → Add track. A song’s three dots → Upload new version.

  1. In the library, make a new project and give it a name.
  2. On the project page press Add track and pick an audio file. It becomes a song.

The file chooser opens in the folder you last added music from.

On a computer (the browser or the desktop app) you can also drag audio files from a folder straight onto the project. Over the list, the songs slide apart and a dashed slot shows where the new ones will land: drop above, between or below the songs. Several files at once become several songs, in the order your computer hands them over.

  1. When you have a new bounce of a song, open the song’s three dots and choose Upload new version. It becomes that song’s newest version.

File types: WAV, AIFF, FLAC, MP3 and M4A. Files are kept exactly as you upload them.

A file can be up to 500 MB.

On an Android phone, to see your newest files first: in Settings → Storage, sync and folders → Adding music, choose the folder you bounce or save music into. Add track then lists that folder’s newest files at the top, with "Browse the phone" for anything else. Pictures (cover art, your profile picture) open the phone’s photo picker, newest first.

You can add music with no connection: it plays at once and uploads by itself when you are back online.

No signal, and the status light

Everything you have played is on the device.

Where: Library, top right: the light. Project page: Save in app.

Once a song has been played on a device, the file, its waveform and its analysis are on that device and show at once, with or without a connection.

  • Save in app, on a project page, fetches the whole project so all of it plays with no signal.
  • A small turning ring on a song, an album version or a project means it is still being fetched or prepared. When the ring is gone, that song starts instantly.

The light in the library: green means everything is up to date, amber means it is syncing, red means there is no connection or something is not saved yet.

What you do with no connection (comments, new versions, new songs) is sent when you are back online and keeps the time you really did it.

The app updates itself silently. The number next to the light goes up when it has.

Listening

The player

One player for the whole app.

Where: The bar at the bottom of every screen.

  • Tap a song’s play button on a project page to play it; the rest of the project follows in order.
  • The bar at the bottom shows what is playing. Tap it to open that song.
  • Repeat (all, or one song) and shuffle are on the project page and the song page.
  • Songs of an album follow each other with no gap.
  • On a phone the music keeps playing with the screen off, one song after the other, with controls on the lock screen.

On a computer: space plays and pauses on a song page.

Versions, and comparing two (A/B)

Switch between two versions without losing your place.

Where: Song page → the versions list and the A/B button.

Open a song and open its versions. Each version shows its name, when it was added, its file type and size, and a note on what changed if one was written.

  1. In the versions list, mark one version as A and another as B.
  2. Press play, then press the A/B button to flip between them. The music carries on from the same spot, with no click.
  3. Turn on Match loudness to hear both equally loud, so the louder one does not win just by being louder.

If you mark nothing, A/B flips between the last two versions you played.

On a computer: the number keys pick a version, F flips A and B.

The version a song plays with: on the project page a song with more than one version shows a chip such as V2 next to its play button. The owner taps it to choose which version the song opens and plays with. Until then it is the newest.

Analysis

Loudness, peaks, stereo and tonal balance of each version.

Where: Song page → Analysis.

Each version is measured once, on your device: integrated loudness, the loudest three seconds, loudness range, true peak, dynamics, clipping, stereo width, correlation, left and right balance, and a ten band tonal balance.

With two versions picked as A and B, every figure also shows the difference from the other one.

Under Listening in the same panel: Mono, to check how a mix folds down, and Speed. Both are for your ears only: they are not saved and nobody else hears them.

Lyrics, notes and descriptions

The words that belong with the music.

Where: Song page → Lyrics. Versions list → a version’s note. Project page → Details.

  • Lyrics belong to a song. The owner writes them, or a collaborator tagged Lyricist.
  • A note belongs to a version: what changed in this bounce. Whoever added the version, or the owner, writes it.
  • A description and an artist name belong to a project, set from Rename and details on the project.

MIDI and tempo

The session’s MIDI on a song: its tempo map, the drums, the bass. It shows the song’s tempo and can be downloaded.

Where: Song page → MIDI (next to Lyrics).

A song can carry MIDI files, for two things: showing the tempo through the song, and handing the MIDI to someone who wants to drop it into their own session to track along with.

  1. On the song page, open MIDI and press Add MIDI.
  2. Choose a .mid file exported from your session.
  3. Say what it is (Drums, Bass, Tempo map). Minotune suggests the name of the track inside the file.
  4. Leave "Take the song’s tempo from this file" on if this file holds the session’s tempo. Press Add to the song.

Tempo: with a tempo source chosen, the MIDI tab shows the tempo at the playhead, the panel lists every tempo section (tap one to go there), and under the waveform there is a row of tempo pills, one where each tempo begins, with a faint line through the waveform above it. Tap a pill to go there. The pill of the tempo that is playing is lit and lies on top of its neighbours for as long as that tempo lasts, so tempos that sit close together can still be told apart. Comments have the row above the waveform, tempo the row below. These are the session’s own figures read from the file, not a guess from the audio. One file per song is the tempo source; switching another on switches the first off. A drawn-in tempo ramp gets a pill only where it has moved a whole beat a minute.

Export the MIDI from the same starting point as the mix (bar one, or wherever the bounce begins), or the tempo changes will sit early or late against the audio.

  • Who can add: the owner and collaborators who may add versions. 2 MB a file, 20 files a song.
  • Who sees the label and the tempo: everyone who can see the song, link visitors too.
  • Who can download the file: the same people who may download the song. Download is on each file in the MIDI panel.
  • Rename, the tempo switch and Remove are for the owner and for whoever added the file.

MIDI belongs to the song, not to one version of it. It needs a connection to add, change or download; the tempo keeps showing without one once the song page has been opened.

Feedback

Comments on the waveform

Notes pinned to a moment or a section of a song.

Where: Song page.

  1. Open a song and tap the comment box under the waveform. The comment is pinned to where the playhead is.
  2. To comment on a section instead of one moment, drag across the waveform: that stretch is marked, and you can adjust its ends before you post. A tap on the waveform still jumps there while a section is marked; "Clear section", next to the handles, removes the marking.
  3. Write what you hear and press Post.

Comments belong to the version they were written on. Tap a comment to jump to its place in the song.

Comments are a checklist: tick one when it is dealt with and it, its pin and its section turn green. Unresolved only hides the ones that are done.

While a song plays, comments can pop up as the playhead reaches them. That is switched in Settings → Look and listening → Comment pop ups.

Blind A/B test

Let someone choose between two versions without knowing which is which.

Where: A song’s three dots → Share this song → Blind A/B test.

A blind test is something you send. Whoever opens the link hears the song’s two newest versions as A and B, in a chance order and at matched loudness. Names, notes, analysis and comments are hidden.

They pick the one they prefer. If the link allows comments, their pick is posted as a comment on the version they chose, so you see it.

Sharing

Collaborators

People who add songs and versions to your project.

Where: Project page → Share → enter their email address.

  1. In Share, type the person’s email address, and their name if you like. Someone you have worked with before is one tap: see "People you have worked with" below.
  2. Press Create invitation. Minotune emails it to them at once: "<your name> invited you to be a collaborator on <project>", with a button that opens the project. Only the account with that email address can accept it.

For the person you invite it is one tap: if they have no account yet, pressing the button in the email makes one with that address and opens the project, with nothing to type. Someone who already has an account signs in as usual (a code by email) and the project is there. The button does this once; after "Email again", only the newest email’s button does.

An answer to that email comes to you. "Email again" on the invitation sends it once more (three times a day at most); Copy link gives you the link to send yourself.

A collaborator can add songs and versions, manage the versions they added, and rename a song they added themselves. Reordering and deleting songs, and renaming anyone else’s, stays with you. They stay until you remove them in Share.

Whose is whose: in a project that more than one person adds music to, every song shows the face of whoever added it, with their first name ("You" for your own), in front of its length. When the version a song stands on was added by someone else, that person’s face is on the version chip (V2). The list of versions says "Added by" under each one. Each face wears a thin ring in that person’s own colour: the colour they chose for the app, or the one Minotune gave them. A project only you add to shows none of this.

Roles say what someone does (Lyricist, Label, Producer and others). Pick them while inviting: under the email address, tap the roles the person should have, and they have them the moment they accept. Two roles also let their holder do more: a Lyricist may write and change lyrics (otherwise only you can), and a Label may change the project’s artwork.

To see who is in a project, tap the row of faces under its title ("2 people"). Everyone in the project sees the same list: the owner, the collaborators and their roles, and how many people listen through links. As the owner you also get the tools there: Roles to change what someone does, Remove to take them out, and Invite someone.

A picture someone has not set is the Minotune mark in a colour of their own, so people can be told apart in a list. Guests, who have no account, are always grey.

People you have worked with: once an invitation between you and someone has been accepted, whichever of you sent it, they are offered by name above the email field whenever you invite to a project or a shared folder. It is a checklist: tap everyone you want (a tick shows on each), then press the one button, which says how many invitations it sends; each person gets their own. In a project the collaborator switch goes on with the first tick, and the roles you pick go to each of them. You can still type one more address underneath. Type a few letters to narrow the row. It is not a list anyone else can see, nothing is added by hand, and people who are already in are left out. Someone who was invited but has not accepted yet is not there until they do.

Collaborators are only invited by email. A link that lets anyone who holds it add music does not exist, on purpose.

A collaborator can make links of their own: the Share button is on the project and song pages for them too. Their links are for listening (and comments, if they switch that on), with a password, an end date or a play limit if they want; they cannot let a link download, invite anyone or send finals. A collaborator sees only the links they made, never yours, and sees who listened through their own. You see every link, with "Made by" on the ones a collaborator made, and can switch any of them off. If you remove a collaborator or stop them adding versions, every link they made stops working at once.

"Email again" shows a tick and "Email sent" once the email has left. An invitation can be emailed three times a day; after that the button is greyed out until tomorrow, and Copy link still works. To work with the same people on many projects, such as everything for one artist, share a folder instead: see "Shared folders".

Shared folders

Work with the same people on every project of one artist.

Where: Library → the "All folders" drop-down → pick a folder → Share.

A folder is a label you give your projects (Rename and details on a project). Folders are a filter: beside "All projects" under the search field is a drop-down that says "All folders". Tap it and pick a folder (two heads mark a shared one, and the number is how many projects it holds) to see only what is in it. The drop-down then carries the folder’s name, and a line of its own appears underneath: a pill with the faces of everyone in the folder (tap it for the full list; when there are more than fit they fade out to the right) and Invite beside it (or "Share" for a folder you have not shared yet); pick "All folders" to see everything again. Sharing a folder lets people into everything in it at once:

  • Everyone you invite is a collaborator on every project in the folder: they listen, comment, and add songs and versions.
  • A project you put into the folder later is shared with them by itself. A project you take out of it is closed to them again.
  • They can put projects of their own into the folder. Such a project stays theirs and counts toward their storage; everyone in the folder collaborates on it.

To share a folder:

  1. In the library tap the "All folders" drop-down and pick the folder.
  2. Press "Share" (or Invite once it is shared). Tick people you have worked with, or enter an email address (and a name if you like), and press the invite button.
  3. Minotune emails the invitation. Its button opens the folder for that address only; someone with no account gets one made by that button, with nothing to type.

The same sheet shows who is in, lets you email an invitation again, remove a person, or stop sharing. Removing someone, or stopping, takes the folder’s projects off their devices; a project they were invited to separately stays theirs to open.

When someone shares a folder with you:

  • Its projects appear in your library. It is in the folder drop-down under All and Collaborations, with its name and its owner’s.
  • To add a project of yours, new or one you already had: press and hold it in the library (or right-click) and choose "Move to folder", then the shared folder. Or open the project, tap Details, and tap the folder’s name under the folder field (shared folders are suggested there with two heads and their owner’s name), then Save. Or pick the folder in the drop-down and tap "Add project", or make a new project while that folder is picked. It stays yours; everyone in the folder can work on it from then on.
  • The pill of faces also shows who else is in the folder and lets you leave. Leaving takes your own projects out of the folder with you.

People get into a folder only by an invitation to their email address. There is no link to a folder.

Changing who or what is in a shared folder needs a connection.

Who has listened

Openings, plays and downloads, by person and by country.

Where: Project page → Share → Who has listened, and from where.

For each link you see who opened it (by name if they have an account), which songs they played and how often, what they downloaded, and from which country, as a list and on a globe.

Where known, the city is shown next to the country ("Austin, Texas, United States"). It is worked out from the network the person is on, so it can be a neighbouring city, and a VPN shows the VPN’s place. Openings from before this was added show the country only. Above the list, each country is a flag with its number (tap it, or point at it with a mouse, for its name). The list under it is city by city, the busiest first whatever the country; openings with no known city are counted in a line below it. The globe lights each city where it is, and a country with no known city as a soft haze.

The rings on the globe are where links were made, and the lines run from a ring to each city one of that person’s links was opened in. Your ring is solid; a collaborator who made links of their own has a dashed ring where they made them, so you can see what went out from whom. A link made before places were kept starts where you are now.

An open link cannot show who passed it on to whom: it is the same link for everyone who has it, so there is no telling whether someone in Toronto forwarded it to someone in Berlin or you sent it to both. A personal link can: it was made for one person, so when someone else opens it far from them, a dashed red line runs from where that person opened it to where it turned up, and the listener is marked "Passed on".

When someone plays a song through a link, you also get a short message the next time your app syncs.

Messaging and mail services often open a link by themselves when it is sent, from their own servers, sometimes in another country. An opening that looks like that (a guest who opened once, played nothing, from a country where none of your listeners are) is left out, and the page says how many were left out. It is a best guess: a real person in a new country shows up as soon as they play something.

Notifications

What other people did with your music, in one list.

Where: Library → the bell (top right).

The bell in the library shows a dot when there is news. Tap it for the list, newest first. On a wide window (the desktop app, or a browser on a computer) the list is a panel at the right edge instead of a screen of its own: the bell shows and hides it, the page stays where it is beside it, and on a very wide window it is there from the start. What it lists:

  • someone opened a link you sent
  • someone played one song, or several from a project
  • someone downloaded a song, a project, or the stems
  • someone commented, with the first words of the comment
  • a collaborator added a version

People with an account show by name; a guest shows as "Someone from" and their country. Tap a line to open the song or project it is about. The chips at the top narrow the list to one kind.

The last 30 days are shown. The list is fetched when you open the library or the bell, so it needs a connection to be current; without one you see what was there last time.

For the full picture of one project (every person, every country, the globe), use Who has listened in Share.

Downloads

Taking the original files out of the app.

Where: A song’s three dots → Download. Project page → Download all as a zip. Settings → Security and privacy → Download full library.

  • Download saves one song as its original file.
  • Download all as a zip packs each song of the project, as the version it plays with, in order and in original quality.
  • Download full library, in Settings, saves every project you own with every version.

Every downloaded song carries its details inside the file: title, artist, album, and its track number, which is its place in the project. In a zip the files are also named in that order (01, 02, 03), so the album plays in the right order in any player. A number you typed in front of a title when bouncing ("03 Daylight") is replaced by the song’s real place.

On a phone each download asks where to save, starting in the folder you used last.

Who may download: you and people you invited by name, always. Someone who came through a link only if that link allows downloads, and then they are asked for an email address first. Every download is written down for the owner.

Save in app is something else: it keeps a project on the device for playing with no signal, and takes nothing out of the app.

Finishing a record

Finals: sending the finished record

Put together the final lossless files and hand them over with one link.

Where: Project page → Build finals (under the songs).

When a record is done, someone needs the finished files: a label, a distributor, a mastering house. They should get exactly the right file of each song and nothing of the work behind it. That is what finals are for.

Building the finals is like making one more album version, only for sending, with one rule: every file in it is lossless (WAV, AIFF or FLAC).

  1. On the project page press Build finals.
  2. Tick the songs that go out. A song with more than one lossless version shows them as chips: pick the one that is final.
  3. A song that only has an MP3 or M4A cannot go in. Press Upload lossless on it to add a WAV, AIFF or FLAC.
  4. Press Build finals. From then on the button on the project reads FINALS with the number of songs.
  5. Add stems if you want to send them (see Stems).
  6. Make the FINALS link and send it.

What the receiver gets: a plain album page with the artwork, each song once, a play button, and Download all as a zip. No versions, no comments, no notes. They need no account.

What they never get: any other version of a song, songs you left out, or any comment. This is enforced on the server, not only hidden on the screen.

You can change the finals afterwards: tick, untick or pick another version, and it saves by itself. Every FINALS link then hands out the new build. To stop sending, switch the link off in Share.

The audio goes out untouched, exactly as you uploaded it. Title, artist, album and track number are written into each file, so the record arrives in the right order.

Building finals needs a connection.

Stems

The separate parts of the finished songs, sent along with the finals.

Where: Project page → Build finals → Stems.

Stems are for a remixer, a mastering house or a label that asks for them. You add them to the finals; whoever opens the FINALS link gets one Download stems button that fetches all of them.

  • Lossless only: WAV, AIFF, FLAC, or a zip of those.
  • Stems are never listed as songs, played or commented on.
  • Only people on a FINALS link, and people you invited by name, can get them. For everyone else they do not exist.
  • Adding stems comes with the paid plans (Pro and Studio). Receiving them needs no plan.

A stems file can be up to 500 MB, so zip each song’s stems separately if they are very large.

Album versions

Keep whole earlier passes of a record side by side.

Where: Project page → Edit → Add album version.

An album version is a whole pass of the record: the first mixes as V1, the revised ones as V2, and so on.

The first time you add one, the songs you have become V1 and an empty V2 is added. The project then opens on the list of album versions, newest on top; tap one to see its songs under it.

The player stays inside the album version you are listening to. Each album version can be downloaded as its own zip.

Keeping order

The library

Find, sort and tidy your projects.

Where: Library.

  • Filters: under the search field are two drop-downs on one line. The first chooses whose projects you see: All projects, Mine, Shared with me (came through a link) or Collaborations (every project you work on with other people, whether it is someone else’s you were invited to or your own with people in it); each choice shows how many it holds. The second chooses a folder. A filter that is narrowing the list is shown in your colour.
  • Search looks through project and song names.
  • Order: Recent, A to Z or Newest. View: covers or a list.
  • Press and hold a project (or right click) for its menu: Open, Favourite, Share, Save in app, Download as a zip, Archive, Rename, Duplicate, Delete project.
  • Favourites sort first. Archived projects move to their own tab. Both are yours alone: nobody else sees them.
  • With a mouse, a right-click on a project, a song or an album version opens the same menu that pressing and holding (or the three dots) opens on a phone.
  • A folder is one label per project, set under Rename and details, or by pressing and holding a project and choosing "Move to folder". The library can show one folder at a time. A new project made while a folder is selected goes into that folder. A folder can be shared with people: see "Shared folders".

Ordering, moving and copying songs

Arrange a project and move songs between projects.

Where: Project page.

  • Order: on a phone, press and hold a song and drag it; with a mouse, just drag it. Or press Edit for Move up and Move down.
  • A song’s three dots: Download, Upload new version, Share this song, Rename, Move to another project, Copy to another project, Delete.
  • Move takes the song with its versions and comments. Copy makes a second song with the versions but without the comments.
  • Duplicate, in the library menu, copies a whole project with its songs and versions.

Trash

Deleted things wait 30 days and can be brought back.

Where: Library → Trash (projects). Project page → Trash (songs and versions).

A deleted project goes to the trash for 30 days and can be restored whole, with everything in it. A deleted song goes to its project’s trash, and so does a deleted version of a song, with its comments.

A version you delete is also reached from the song’s version list: Trash, at the bottom. Restore puts it back where it was. A collaborator sees and restores the versions they added themselves.

While something is in the trash, nobody but you can open it (for a version: you and whoever added it): collaborators and link visitors lose it at once, and get it back if you restore it.

Delete forever, or the 30 days running out, removes the files for good. Empty trash, at the top, does that for everything in it at once, after asking you to confirm.

Artwork, colours and your profile

Make it look like yours.

Where: Project page → tap the cover. Settings.

  • Tap a project’s cover to set its artwork. Inside that project the app takes its colours from the artwork; this can be switched off in Settings.
  • Settings → Look and listening → Appearance: Minotune is dark unless you choose otherwise: Light, or Match device to follow your phone or computer.
  • Settings → Look and listening → App colour: replace the amber with a colour of your own. The app keeps its look and leans toward your colour; drag a bar sideways or tap it. It follows your account to every device.
  • Settings → the card at the top → Edit profile: your name and picture, shown next to your comments.
  • Settings → the card at the top → Edit profile → Your branding: a company name and logo shown under the songs of every project you own.

On a computer

The desktop app and your Minotune folder

A folder on your computer that mirrors your library. Bounce into a project’s folder and the new version appears in Minotune.

Where: Desktop app → Settings → Storage, sync and folders → Minotune folder.

Minotune works in a browser at its web address, and as an app for Windows. Both show the same library as your phone.

The desktop app updates itself: its screens are always the newest, and when the app itself has a new version it is downloaded quietly and put in place the next time you close it. You are never asked to reinstall.

Your Minotune folder (desktop app 0.1.4 and later). The first time you open the desktop app it asks where your library should live on this computer (it is always a folder called Library inside one called Minotune: beside the app if you installed Minotune in a place of your own, such as another drive, otherwise in your own user folder; choose any other place and Minotune\Library is made there. From desktop app 0.1.7 an update or a reinstall replaces the app and leaves a library beside it alone). In that folder Minotune then keeps:

  • A folder for every project of yours, named after the project.
  • Where a project is in a folder in Minotune, its folder sits inside a folder of that name: Library → Heaven Wept → No Path to Heaven.
  • Rename a project, or put it in another folder in Minotune, and its folder on the computer is renamed or moved to match, with everything in it.
  • A copy of every song, if you leave that switched on: the version each song plays with, in original quality, in its project’s folder. Switch it off in Settings → Storage, sync and folders → Minotune folder to keep only the folders.

To add music, export a mix from your DAW into a project’s folder. It becomes the next version of the song whose name it carries, otherwise a new song. A new folder with a mix in it makes a new project; a new folder inside a folder of projects makes a project in that folder.

Track numbers in file names set the order: "01 Intro", "02. Daylight", "03 - Night Drive" land first, second and third whatever order the files arrive in, and the number is left out of the song’s name. Songs whose files carry no number go to the end, in the order they arrived. A number that is part of a name ("99 Problems") is left alone.

What Minotune never does there: it never deletes or changes a file you put in the folder. The only files it replaces or removes are copies it wrote itself, when a song gets a newer version. Deleting a file in the folder does not delete the song; delete songs in Minotune.

Versions and the folder: a project’s folder holds one file per song, the version it plays with. Export a new mix over that file, or next to it under a name with the same song title ("Daylight v2", "Daylight master"), and it becomes the song’s next version; every older version stays in Minotune, where you compare them, not on the disk. An older copy that Minotune wrote itself is cleared away once the newer mix is there. Mixes you exported yourself stay until you delete them.

Only music is taken. Anything else in the folder (pictures, session files, documents) is left where it is and never uploaded. A file is checked by what is inside it, not by its name, so something renamed to ".wav" is refused, with a message. The same check applies to every file added anywhere in Minotune.

  • Only your own projects get folders, not ones shared with you.
  • A project made in Minotune gets its folder a few seconds later, while the desktop app is running.

The older way, one watched folder for one project, still works for a desktop app older than 0.1.4:

  1. In the desktop app open Settings → Storage, sync and folders → Watched folder.
  2. Pick the folder you bounce into, and the project the files belong to.
  3. Bounce as usual. A new audio file in that folder is added by itself: as the next version of the song whose name it carries, otherwise as a new song.

A folder per project: make a folder inside the watched folder and name it after a project. A mix bounced into it goes to the project of that name, whatever the capitals. A folder whose name is no project of yours makes a new project the moment the first mix lands in it. Mixes dropped straight into the watched folder go to the project chosen in Settings.

  • Only folders directly inside the watched folder count, not folders inside those.
  • It works one way: a new project made in Minotune does not make a folder on the computer.

Closing the window closes Minotune. Mixes you export while it is closed are added the next time it starts. Settings → Storage, sync and folders → Watched folder → "Start with the computer" starts it out of sight when the computer starts, as an icon next to the clock, so the folder is watched without you opening anything; click the icon to open the window. If a page ever looks wrong, F5 loads it again.

Track numbers, version numbers, dates and words like mix, master and final in the file name are ignored when matching, so "03 Daylight master v4.wav" becomes the next version of Daylight.

Files that arrive while the app is closed are picked up the next time it opens.

Listening with the phone locked

Music keeps playing when you leave the app or the browser.

Where: Nothing to switch on.

In the phone app, music keeps playing when you go to another app or lock the phone, with controls on the lock screen.

In the car (Android Auto or Bluetooth): Minotune takes the car’s audio each time you press play, also after another app or a voice message had it. A navigation prompt or a call pauses the music, and it carries on by itself afterwards.

Repeat one keeps going for as long as you like with the phone locked: the song loops inside the phone’s audio system.

An album carries on too: while a song plays, the next two are handed to the phone’s audio system ahead of time, so they start by themselves with the screen off. The lock screen and the pull-down player move on to the song that is playing, and their buttons work on it. After those two, the phone has to be woken once for the album to carry on. Loudness matching is not applied to a song that started this way until you look at the app again, and on a link that counts plays each song still waits for you.

Settings → "Playing with the phone locked" has one switch, Lowest delay, which is off. Off is the steady way of playing, smooth with the screen off. On makes switching between A and B react a touch sooner, but music can stutter or stop when the phone is locked; it takes effect the next time the app starts.

In a phone’s browser it does the same: start a song, then switch apps or lock the phone, and it plays on, with the phone’s own media controls. Some phones stop a browser to save battery after a long time in the background; the app does not have that limit. On an iPhone or iPad the browser also keeps nothing between visits (Safari’s storage is not dependable enough), so your library loads from the internet each time you open Minotune there.

Installing the website as an app

Open Minotune from your dock or home screen, also with no connection.

In Chrome or Edge, open Minotune and choose Install from the address bar or the browser menu. On an iPhone or iPad, use Share → Add to Home Screen.

The installed site opens with no connection and shows what is saved on that device.

Safety and your account

How your music is kept safe

Nothing is public, and you can always take access back.

  • Nothing in Minotune is public. There are no public pages and no profiles to browse.
  • One thing travels with a link you send: its preview (name, description, cover), so the person knows what they are getting. Give the link a password and even that stays hidden.
  • Every file is in private storage. Someone can reach it only while they have access to its project.
  • Every copy that goes to someone else carries an inaudible mark of its own, so a leaked file can be traced to the copy it came from. See "Trace a leak".
  • A file is handed over through a link that works for two minutes, and only after checking, at that moment, that the person may still have it. There is no lasting link to a file that someone could keep for later.
  • A link can carry a password, an end date and a play limit, can block downloads, and can be switched off at any moment.
  • When access ends, the files are removed from that person’s device the next time their app is online.
  • Every opening, play and download is written down for you.
  • A project in the trash is closed to everyone but you.

One honest limit: anyone who can hear a song can record it with another device. Blocking downloads stops the file from being handed over, not that.

Your music stays yours: it is never used to train AI, never sold, never shared, and Minotune claims no rights to it.

Trace a leak

Find out whose copy a leaked file was made from.

Where: Settings → Security and privacy → Trace a leak → Check a file.

Whenever a song goes to someone other than you, their copy gets an inaudible mark that belongs to them alone. Two people who open the same link get two different marks.

  1. Get hold of the file that turned up: a download, a rip, a clip. Any audio file will do.
  2. Open Settings, then "Security and privacy", find "Trace a leak" and press "Check a file".
  3. Choose the file. Reading it takes up to a minute.
  4. You are shown whose copy it was: their name and address if they have an account, the link they came in through, when the copy was made, where the link was first opened, and how often it was opened and played.
  • A guest with no account has no name to show. You still see which link it was, and where and when it was opened. Send a personal link to each person and the link itself tells you who.
  • The mark survives being turned into an MP3 or an M4A, being made mono, and being cut shorter: about half a minute is enough.
  • No mark is put into your own copies, into the copies of whoever uploaded that version, or into files sent through a FINALS link, which go out exactly as you bounced them.
  • It only answers for your own projects. A file from somebody else’s music tells you nothing.

Honest limits: a recording made through speakers and a microphone usually loses the mark, and so does a copy that was sped up or slowed down. A weak reading is a lead, not proof, and the result says how clear the reading was.

The first time someone plays a song of yours, their copy is prepared, which takes around ten to twenty seconds; after that it is on their device.

Plans and storage

Which plan you are on and how much room is left.

Where: Settings → the card at the top, under your name.

Settings shows your plan, a bar for how much of its storage you have used, and "Upgrade" (or "Your plan") for all three side by side: Free (2 GB), Pro (100 GB, $10 a month or $100 a year) and Studio (1 TB, $20 a month or $200 a year). Pro and Studio also let you add stems to your finals.

Every version you upload counts in its original quality, and keeps counting while it is in the trash, until it is removed for good.

From 80% used, Settings says so and the library tells you once each time you open the app. When it is full, new music cannot be added until you make room: empty the trash, or delete versions you no longer need.

To get Pro or Studio: Settings → Upgrade, choose Monthly or Yearly, and press "Get Pro" or "Get Studio". Payment happens on Stripe’s own page; Minotune never sees your card. The plan switches over a few seconds after paying, on every device you sign in on.

To change plan, switch to yearly, update the card or cancel: Settings → Your plan → "Change plan, cancel or update the card". A cancelled plan lasts to the end of what was paid for, then becomes Free; nothing you uploaded is deleted, but new music cannot be added while you are over the free 2 GB.

Plans are bought at minotune.com, in a browser or the desktop app. The phone apps show your plan but do not sell one.

Signing in, the app lock and deleting your account

How you get in, and how you leave.

Where: Settings → Account.

  • Signing in: type your email address and open the link in the email. There is no password. You stay signed in on that device until you sign out.
  • Signing out ends the session on that device only.
  • App lock (phones, off by default): asks for your fingerprint, face or code when the app opens and after a minute away.
  • Delete account removes your projects, files and sign-in for good. It asks twice.

If someone sent you a link

Listening as a guest

What you can do with a link you were sent.

A link opens the music in your browser. You need no account and no app.

  • Listen, and switch between versions if there are several.
  • If the sender allowed it, comment: tap the comment box under the waveform, or drag across the waveform to mark a section.
  • If the sender allowed downloads, you are asked for your email address first. Your comments stay yours when you do.
  • A FINALS link shows a finished record: play the songs and download them, one by one or all as a zip.
  • Want Minotune for your own music? Tap Sign up, top right on the project or song (or at the bottom of the library). It asks for your email address and nothing else; what you were sent stays in your library, and it is free.

If a song will not start, the sender may have limited the number of plays, set an end date, or switched the link off.

Not answered here? Write to us.